|
The Algae Problem |
Problem: Algae
Solution
The addition of shock and algaecide on a regular basis will
be more effective at preventing algae growth than treating
algae once it is visible in a pool. However, if algae do
appear, follow the steps below for treatment:
| 1. Adjust the pH to 7.2 -
7.4. |
| 2. Brush the pool sides
vigorously. |
| 3. Shock the pool with POOLIFE
TurboShock or POOLIFE Rapid Shock. |
4. Add your POOLIFE
AlgaeBomb 30, POOLIFE Super AlgaeBomb 60, or POOLIFE
Algae Ban according
to label directions. Your authorized POOLIFE
Dealer can recommend which product is best for your
pool. |
| 5. Run the filter 24 - 48
hours, brushing and vacuuming frequently. |
| 6. If algae remain a
problem, contact your authorized POOLIFE Dealer for
further directions. |
NOTE – If you continue to experience algae,
despite a high chlorine reading, the pool water may contain
too much stabilizer
[cyanuric acid] which interferes with the efficiency of the
chlorine - ensure you are following responsible pool care by
shock-treating
with a POOLIFE calcium hypochlorite based shock product
|
Contact us at 888-200-3011
Home -
Above Ground Pools -
Portable Pools -
Custom Made Pools
- Pool Gallery -
Pool Supplies
|
